Availability: | |
---|---|
Quantity: | |
A drainage basket, which includes a basket body and a mesh hole arranged at the bottom of the basket body. One side of the basket body extends outward with a hook, and the bottom of the basket body is equipped with supporting feet.
The drainage basket of this utility model is hung or placed at the edge or bottom of the sink, and can be used in conjunction with different models of sinks. The drainage effect is good and the use is convenient.
ITEM | UNIT | SZ—4800A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 70 | 75 | 80 |
SCREW LID RATIO | L/D | 22.6 | 21 | 19.7 |
THEORETICAL SHOT VOLUME | CM3 | 1346 | 1545 | 1758 |
SHOT WEIGHT(PS) | g | 1225 | 1406 | 1600 |
INJECTION PRESSURE | Mpa | 201 | 175 | 154 |
THEORETICAL INJECTION RATE(PS) | g/s | 370 | 423 | 484 |
PLASTICISING CAPACITY | g/s | 60.4 | 71.4 | 83.7 |
SCREW TORQUE | N.m | 3490 | ||
MAX.SCREW ROTATE SPEED | r/min | 150 | ||
INJECTION STROKE | mm | 350 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 4800 | ||
MAX.OPENING STROKE | mm | 770 | ||
SPACE BETWEEN TIE BARS | mm | 760×760 | ||
MOULD HEIGHT | mm | 280-790 | ||
MAX.DAYLIGHT | mm | 1560 | ||
EJECTOR FORCE | KN | 113.4 | ||
EJECTOR STROKE | mm | 195 | ||
EJECTOR QUANTITY | 13 | |||
其它 OTHER | ||||
PUMP MOTOR POWER | KW | 45 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 28 | ||
HEATING ZONE | 5 | |||
SIZE | m | 7.5×2.1×2.45 | ||
NET WEIGHT | t | 20 | ||
OIL TANK CAPACITY | L | 850 | ||
INTERNATIONAL DESIGNATION | 4800—2710 |
Criteria for acceptance of molds
1. No defects are allowed on the surface of the product: lack of material, burning, top whitening, white lines, peaks, blistering, whitening (or cracking, breaking), drying marks, wrinkles.
2. Welding line: Generally, the length of circular perforation welding line is not more than 5mm, and the length of irregular perforation welding line is less than 15mm. The strength of the welding line can pass the functional safety test.
3. Shrinkage: No shrinkage is allowed in obvious areas of the appearance, and slight shrinkage (no dents to the touch) is allowed in inconspicuous areas.
4. Generally, the flatness of small products is less than 0.3mm. If there are assembly requirements, they must be ensured.
5. There should be no air marks or material marks in obvious areas of the appearance, and the product generally should not have bubbles.
6. The geometric shape and dimensional accuracy of the product should comply with the requirements of formal and effective mold drawings (or 3D files). The product tolerance should be based on the tolerance principle, with negative tolerance for shaft dimensions and positive tolerance for hole dimensions. If the customer has any requirements, it should comply with the requirements.
7. Product wall thickness: The general requirement for product wall thickness is to achieve average wall thickness. Non average wall thickness should meet the requirements of the drawing, and the tolerance should be -0.1mm according to the characteristics of the mold.
8. Product Matching: Shell to Shell Matching - The surface misalignment is less than 0.1mm, and there should be no scratching phenomenon. Holes, shafts, and surfaces with matching requirements should ensure matching spacing and usage requirements.
Certificate
Our Company
Our Customers
A drainage basket, which includes a basket body and a mesh hole arranged at the bottom of the basket body. One side of the basket body extends outward with a hook, and the bottom of the basket body is equipped with supporting feet.
The drainage basket of this utility model is hung or placed at the edge or bottom of the sink, and can be used in conjunction with different models of sinks. The drainage effect is good and the use is convenient.
ITEM | UNIT | SZ—4800A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 70 | 75 | 80 |
SCREW LID RATIO | L/D | 22.6 | 21 | 19.7 |
THEORETICAL SHOT VOLUME | CM3 | 1346 | 1545 | 1758 |
SHOT WEIGHT(PS) | g | 1225 | 1406 | 1600 |
INJECTION PRESSURE | Mpa | 201 | 175 | 154 |
THEORETICAL INJECTION RATE(PS) | g/s | 370 | 423 | 484 |
PLASTICISING CAPACITY | g/s | 60.4 | 71.4 | 83.7 |
SCREW TORQUE | N.m | 3490 | ||
MAX.SCREW ROTATE SPEED | r/min | 150 | ||
INJECTION STROKE | mm | 350 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 4800 | ||
MAX.OPENING STROKE | mm | 770 | ||
SPACE BETWEEN TIE BARS | mm | 760×760 | ||
MOULD HEIGHT | mm | 280-790 | ||
MAX.DAYLIGHT | mm | 1560 | ||
EJECTOR FORCE | KN | 113.4 | ||
EJECTOR STROKE | mm | 195 | ||
EJECTOR QUANTITY | 13 | |||
其它 OTHER | ||||
PUMP MOTOR POWER | KW | 45 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 28 | ||
HEATING ZONE | 5 | |||
SIZE | m | 7.5×2.1×2.45 | ||
NET WEIGHT | t | 20 | ||
OIL TANK CAPACITY | L | 850 | ||
INTERNATIONAL DESIGNATION | 4800—2710 |
Criteria for acceptance of molds
1. No defects are allowed on the surface of the product: lack of material, burning, top whitening, white lines, peaks, blistering, whitening (or cracking, breaking), drying marks, wrinkles.
2. Welding line: Generally, the length of circular perforation welding line is not more than 5mm, and the length of irregular perforation welding line is less than 15mm. The strength of the welding line can pass the functional safety test.
3. Shrinkage: No shrinkage is allowed in obvious areas of the appearance, and slight shrinkage (no dents to the touch) is allowed in inconspicuous areas.
4. Generally, the flatness of small products is less than 0.3mm. If there are assembly requirements, they must be ensured.
5. There should be no air marks or material marks in obvious areas of the appearance, and the product generally should not have bubbles.
6. The geometric shape and dimensional accuracy of the product should comply with the requirements of formal and effective mold drawings (or 3D files). The product tolerance should be based on the tolerance principle, with negative tolerance for shaft dimensions and positive tolerance for hole dimensions. If the customer has any requirements, it should comply with the requirements.
7. Product wall thickness: The general requirement for product wall thickness is to achieve average wall thickness. Non average wall thickness should meet the requirements of the drawing, and the tolerance should be -0.1mm according to the characteristics of the mold.
8. Product Matching: Shell to Shell Matching - The surface misalignment is less than 0.1mm, and there should be no scratching phenomenon. Holes, shafts, and surfaces with matching requirements should ensure matching spacing and usage requirements.
Certificate
Our Company
Our Customers