Water bottle cap molds can be classified according to different standards, and the following are some common classification methods:
1. According to the purpose of the mold:
-Experimental mold: mainly used for testing. During the trial mold and production process, significant modifications may be made to the structure or dimensions, and only a small number of trial production samples will be made after confirmation.
-Production mold: A mold manufactured for the purpose of formal production, with high control requirements for mold structure, material, accuracy, durability, and product size. It usually has a large number of cavities, ranging from 8 to 144 cavities.
2. Divided by the number of mold cavities:
-Less cavity mold: A mold with less than 8 cavities (excluding 8 cavities), usually used as a test mold or a production mold with low production capacity.
-Multi cavity mold: 8 cavities (including 8 cavities) to 48 cavities (including 48 cavities), suitable for mass production, with certain cycle and production capacity requirements.
-Multi cavity mold: With over 48 cavities, there is a great demand for production capacity, high requirements for various dimensions of the mold, and excellent quality assurance requirements throughout the mold lifecycle.
3. Classified by the structural characteristics of injection molds:
-Single parting injection mold (two plate injection mold): One part of the mold cavity is on the moving mold, and the other part is on the fixed mold.
-Double parting injection mold (three plate injection mold): specifically refers to a mold in which the pouring system material and components are taken out from different parting surfaces.
4. Classified by dimensional accuracy of plastic parts:
-General injection mold: suitable for plastic parts with general dimensional accuracy requirements.
-Precision injection mold: suitable for plastic parts with high dimensional accuracy requirements.
5. Classified by mold pouring system:
-Cold runner mold: The runner and gate are located on the parting line and are released together with the product during mold opening.
-Hot runner mold: The runner is located in one or more hot runner plates and hot nozzles with constant temperature, without cold material demolding, and the runner and gate are directly on the product.
These classifications reflect the diversity in design, production, and functionality of water bottle cap molds to meet different production needs and product characteristics.
Technical Parameter
ITEM | UNIT | SZ—1300A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 35 | 40 | 45 |
SCREW LID RATIO | L/D | 24 | 21 | 18.7 |
THEORETICAL SHOT VOLUME | CM3 | 173 | 226 | 286 |
SHOT WEIGHT(PS) | g | 158 | 206 | 260 |
INJECTION PRESSURE | Mpa | 235 | 180 | 142 |
THEORETICAL INJECTION RATE(PS) | g/s | 110 | 143 | 181 |
PLASTICISING CAPACITY | g/s | 13.8 | 19.7 | 27.1 |
SCREW TORQUE | N.m | 740 | ||
MAX.SCREW ROTATE SPEED | r/min | 250 | ||
INJECTION STROKE | mm | 180 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1300 | ||
MAX.OPENING STROKE | mm | 400 | ||
SPACE BETWEEN TIE BARS | mm | 420×420 | ||
MOULD HEIGHT | mm | 160-440 | ||
MAX.DAYLIGHT | mm | 840 | ||
EJECTOR FORCE | KN | 31.4 | ||
EJECTOR STROKE | mm | 100 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 13 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 9.2 | ||
HEATING ZONE | 4 | |||
SIZE | m | 4.7×1.25×1.85 | ||
NET WEIGHT | t | 4.3 | ||
OIL TANK CAPACITY | L | 360 | ||
INTERNATIONAL DESIGNATION | 1300—410 | |||
Reliable High-speed Energy-saving 2400KN Hydraulic Injection Making Molding Machine
SZ series Injection Molding Machine will offer you the best performance, safety and reliability. This machine applies 5-point double toggle links clamping system featured reliable, energy-saving, high-speed, stable, long closing stroke and big clamping force.
Hydraulic motor drives the mould adjustment device with the advantage of rapid and light. This machine is equipped with one line type screw. The hydraulic motor with low speed and big torque can directly drive plasticizing, double cylinder type injection system, with the feature of processing many kinds of material, strong plasticizing ability and fine injection effect.
Three optional screws are supplied for every model to meet the various requirements of customers. The barrel is heated by resistance heating rings. The temperatures are controlled by automatic Temperature Controller or the PAD system in computer with the feature of quick, stable and even. This machine offers electrical and mechanical safety interlock at least. And the bigger or superior machine also provide hydraulic safety interlock to assure safe and reliable.
The SZ series Injection Molding Machine is the ideal choice for manufacturing plastic water bottle caps with unparalleled efficiency and precision. With its powerful 2400KN clamping force and advanced 5-point double toggle links clamping system, this machine guarantees high-speed, stable, and energy-saving operations. The hydraulic motor-driven mold adjustment ensures quick and effortless changes, while the low-speed, high-torque motor and double cylinder injection system deliver exceptional plasticizing and injection performance. Customizable with three optional screws, this machine can handle a variety of materials to meet diverse production needs. The barrel's resistance heating rings and automated temperature control ensure consistent and high-quality output. Enhanced safety features, including electrical, mechanical, and hydraulic interlocks, provide comprehensive protection during operation.
In summary, the SZ series Injection Molding Machine offers superior performance, energy efficiency, and reliability, making it the perfect solution for your plastic water bottle cap production needs. Elevate your manufacturing capabilities by ordering this state-of-the-art machine today. Contact us now to secure your investment in quality and efficiency!
FAQ
1.How long is the warranty period for the machine?
The warranty period of the machine is 1 year, and the after-sale is lifelong.
2.What payment methods do you support?
LC 、TT、credit card
3.Can you come to our company for professional guidance?
Of course, we can send professional engineers to the customer's location for profes
sional technical guidance and training.
4.Can we customize the machine if there is a special request?
Yes, we will work out a suitable plan according to the client's budget.
5.Do you have any agent abroad?
We have agents in Peru, Zimbabwe, Ethiopia, Kazakhstan, India.
6.How long does the machine last?
At least 20 years.
7.Do you have any free accessories?
Heating band for Nozzle，Heating band for barrel，Oil seal for Injection，Oil seal for Clamping，Solid State Relay，Proximity switch，Thermocouple，internal hexagonal wrench，Mould clip，Level pad，Plug（380V 220V），filter core，Lubrication grease.
Water bottle cap molds can be classified according to different standards, and the following are some common classification methods:
1. According to the purpose of the mold:
-Experimental mold: mainly used for testing. During the trial mold and production process, significant modifications may be made to the structure or dimensions, and only a small number of trial production samples will be made after confirmation.
-Production mold: A mold manufactured for the purpose of formal production, with high control requirements for mold structure, material, accuracy, durability, and product size. It usually has a large number of cavities, ranging from 8 to 144 cavities.
2. Divided by the number of mold cavities:
-Less cavity mold: A mold with less than 8 cavities (excluding 8 cavities), usually used as a test mold or a production mold with low production capacity.
-Multi cavity mold: 8 cavities (including 8 cavities) to 48 cavities (including 48 cavities), suitable for mass production, with certain cycle and production capacity requirements.
-Multi cavity mold: With over 48 cavities, there is a great demand for production capacity, high requirements for various dimensions of the mold, and excellent quality assurance requirements throughout the mold lifecycle.
3. Classified by the structural characteristics of injection molds:
-Single parting injection mold (two plate injection mold): One part of the mold cavity is on the moving mold, and the other part is on the fixed mold.
-Double parting injection mold (three plate injection mold): specifically refers to a mold in which the pouring system material and components are taken out from different parting surfaces.
4. Classified by dimensional accuracy of plastic parts:
-General injection mold: suitable for plastic parts with general dimensional accuracy requirements.
-Precision injection mold: suitable for plastic parts with high dimensional accuracy requirements.
5. Classified by mold pouring system:
-Cold runner mold: The runner and gate are located on the parting line and are released together with the product during mold opening.
-Hot runner mold: The runner is located in one or more hot runner plates and hot nozzles with constant temperature, without cold material demolding, and the runner and gate are directly on the product.
These classifications reflect the diversity in design, production, and functionality of water bottle cap molds to meet different production needs and product characteristics.
Technical Parameter
ITEM | UNIT | SZ—1300A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 35 | 40 | 45 |
SCREW LID RATIO | L/D | 24 | 21 | 18.7 |
THEORETICAL SHOT VOLUME | CM3 | 173 | 226 | 286 |
SHOT WEIGHT(PS) | g | 158 | 206 | 260 |
INJECTION PRESSURE | Mpa | 235 | 180 | 142 |
THEORETICAL INJECTION RATE(PS) | g/s | 110 | 143 | 181 |
PLASTICISING CAPACITY | g/s | 13.8 | 19.7 | 27.1 |
SCREW TORQUE | N.m | 740 | ||
MAX.SCREW ROTATE SPEED | r/min | 250 | ||
INJECTION STROKE | mm | 180 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1300 | ||
MAX.OPENING STROKE | mm | 400 | ||
SPACE BETWEEN TIE BARS | mm | 420×420 | ||
MOULD HEIGHT | mm | 160-440 | ||
MAX.DAYLIGHT | mm | 840 | ||
EJECTOR FORCE | KN | 31.4 | ||
EJECTOR STROKE | mm | 100 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 13 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 9.2 | ||
HEATING ZONE | 4 | |||
SIZE | m | 4.7×1.25×1.85 | ||
NET WEIGHT | t | 4.3 | ||
OIL TANK CAPACITY | L | 360 | ||
INTERNATIONAL DESIGNATION | 1300—410 | |||
Reliable High-speed Energy-saving 2400KN Hydraulic Injection Making Molding Machine
SZ series Injection Molding Machine will offer you the best performance, safety and reliability. This machine applies 5-point double toggle links clamping system featured reliable, energy-saving, high-speed, stable, long closing stroke and big clamping force.
Hydraulic motor drives the mould adjustment device with the advantage of rapid and light. This machine is equipped with one line type screw. The hydraulic motor with low speed and big torque can directly drive plasticizing, double cylinder type injection system, with the feature of processing many kinds of material, strong plasticizing ability and fine injection effect.
Three optional screws are supplied for every model to meet the various requirements of customers. The barrel is heated by resistance heating rings. The temperatures are controlled by automatic Temperature Controller or the PAD system in computer with the feature of quick, stable and even. This machine offers electrical and mechanical safety interlock at least. And the bigger or superior machine also provide hydraulic safety interlock to assure safe and reliable.
The SZ series Injection Molding Machine is the ideal choice for manufacturing plastic water bottle caps with unparalleled efficiency and precision. With its powerful 2400KN clamping force and advanced 5-point double toggle links clamping system, this machine guarantees high-speed, stable, and energy-saving operations. The hydraulic motor-driven mold adjustment ensures quick and effortless changes, while the low-speed, high-torque motor and double cylinder injection system deliver exceptional plasticizing and injection performance. Customizable with three optional screws, this machine can handle a variety of materials to meet diverse production needs. The barrel's resistance heating rings and automated temperature control ensure consistent and high-quality output. Enhanced safety features, including electrical, mechanical, and hydraulic interlocks, provide comprehensive protection during operation.
In summary, the SZ series Injection Molding Machine offers superior performance, energy efficiency, and reliability, making it the perfect solution for your plastic water bottle cap production needs. Elevate your manufacturing capabilities by ordering this state-of-the-art machine today. Contact us now to secure your investment in quality and efficiency!
FAQ
1.How long is the warranty period for the machine?
The warranty period of the machine is 1 year, and the after-sale is lifelong.
2.What payment methods do you support?
LC 、TT、credit card
3.Can you come to our company for professional guidance?
Of course, we can send professional engineers to the customer's location for profes
sional technical guidance and training.
4.Can we customize the machine if there is a special request?
Yes, we will work out a suitable plan according to the client's budget.
5.Do you have any agent abroad?
We have agents in Peru, Zimbabwe, Ethiopia, Kazakhstan, India.
6.How long does the machine last?
At least 20 years.
7.Do you have any free accessories?
Heating band for Nozzle，Heating band for barrel，Oil seal for Injection，Oil seal for Clamping，Solid State Relay，Proximity switch，Thermocouple，internal hexagonal wrench，Mould clip，Level pad，Plug（380V 220V），filter core，Lubrication grease.
