English  |
| Quantity: | |
|---|---|
Plastic drums made of PE. With good toughness and low-temperature resistance, suitable for storing low-temperature liquids or solids, such as frozen food and chemicals, plastic buckets made of PE are relatively inexpensive and the manufacturing process is environmentally friendly, but the toughness is poor and easy to be deformed or cracked.
PP material plastic bucket. Harder than PE, with better high temperature resistance and chemical resistance, suitable for industrialization, large-scale material storage and other fields, but compared to PE, PP is harder and prone to fracture.
High Quality Small Hydraulic Injection Making Molding Machine for Plastic Bucket
ITEM | UNIT | SZ—4800A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 70 | 75 | 80 |
SCREW LID RATIO | L/D | 22.6 | 21 | 19.7 |
THEORETICAL SHOT VOLUME | CM3 | 1346 | 1545 | 1758 |
SHOT WEIGHT(PS) | g | 1225 | 1406 | 1600 |
INJECTION PRESSURE | Mpa | 201 | 175 | 154 |
THEORETICAL INJECTION RATE(PS) | g/s | 370 | 423 | 484 |
PLASTICISING CAPACITY | g/s | 60.4 | 71.4 | 83.7 |
SCREW TORQUE | N.m | 3490 | ||
MAX.SCREW ROTATE SPEED | r/min | 150 | ||
INJECTION STROKE | mm | 350 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 4800 | ||
MAX.OPENING STROKE | mm | 770 | ||
SPACE BETWEEN TIE BARS | mm | 760×760 | ||
MOULD HEIGHT | mm | 280-790 | ||
MAX.DAYLIGHT | mm | 1560 | ||
EJECTOR FORCE | KN | 113.4 | ||
EJECTOR STROKE | mm | 195 | ||
EJECTOR QUANTITY | 13 | |||
其它 OTHER | ||||
PUMP MOTOR POWER | KW | 45 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 28 | ||
HEATING ZONE | 5 | |||
SIZE | m | 7.5×2.1×2.45 | ||
NET WEIGHT | t | 20 | ||
OIL TANK CAPACITY | L | 850 | ||
INTERNATIONAL DESIGNATION | 4800—2710 | |||
Plastic drums made of PE. With good toughness and low-temperature resistance, suitable for storing low-temperature liquids or solids, such as frozen food and chemicals, plastic buckets made of PE are relatively inexpensive and the manufacturing process is environmentally friendly, but the toughness is poor and easy to be deformed or cracked.
PP material plastic bucket. Harder than PE, with better high temperature resistance and chemical resistance, suitable for industrialization, large-scale material storage and other fields, but compared to PE, PP is harder and prone to fracture.
High Quality Small Hydraulic Injection Making Molding Machine for Plastic Bucket
ITEM | UNIT | SZ—4800A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 70 | 75 | 80 |
SCREW LID RATIO | L/D | 22.6 | 21 | 19.7 |
THEORETICAL SHOT VOLUME | CM3 | 1346 | 1545 | 1758 |
SHOT WEIGHT(PS) | g | 1225 | 1406 | 1600 |
INJECTION PRESSURE | Mpa | 201 | 175 | 154 |
THEORETICAL INJECTION RATE(PS) | g/s | 370 | 423 | 484 |
PLASTICISING CAPACITY | g/s | 60.4 | 71.4 | 83.7 |
SCREW TORQUE | N.m | 3490 | ||
MAX.SCREW ROTATE SPEED | r/min | 150 | ||
INJECTION STROKE | mm | 350 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 4800 | ||
MAX.OPENING STROKE | mm | 770 | ||
SPACE BETWEEN TIE BARS | mm | 760×760 | ||
MOULD HEIGHT | mm | 280-790 | ||
MAX.DAYLIGHT | mm | 1560 | ||
EJECTOR FORCE | KN | 113.4 | ||
EJECTOR STROKE | mm | 195 | ||
EJECTOR QUANTITY | 13 | |||
其它 OTHER | ||||
PUMP MOTOR POWER | KW | 45 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 28 | ||
HEATING ZONE | 5 | |||
SIZE | m | 7.5×2.1×2.45 | ||
NET WEIGHT | t | 20 | ||
OIL TANK CAPACITY | L | 850 | ||
INTERNATIONAL DESIGNATION | 4800—2710 | |||
