1. PC material
PC itself is not toxic, but PC (polycarbonate) material is not resistant to high temperatures, if heat or in an acidic or alkaline environment, it is easy to release the toxic substance bisphenol A. Some studies have shown that bisphenol A can lead to endocrine disruption, cancer, metabolic disorders resulting in obesity, premature maturation of children and other possible and bisphenol A-related, many countries, such as Canada early on prohibited the addition of bisphenol A to the food packaging, and China has banned the import and sale of baby bottles made of PC in 2011. Many countries, such as Canada, banned the addition of BPA to food packaging at an early stage, and China banned the import and sale of baby bottles made of PC in 2011.
If you are buying a cup made of PC, please buy it from a regular channel to ensure that it is manufactured in compliance with the law.
2. PP material
PP polypropylene, colorless, odorless, non-toxic, semi-transparent, does not contain bisphenol A, flammable, melting point of 165 ℃, in 155 ℃ or so will be softened, the use of temperature range of -30 ~ 140 ℃. PP tableware cups are also the only microwaveable plastic material.
3. tritan
tritan is also a chemical polyester, which solves the disadvantages of many plastics, including toughness, impact strength, hydrolytic stability, chemical resistance, high transparency, and there is no PC in the bisphenol A. tritan has passed the U.S. Food and Drug Administration FDA certification (Food Contact Notification (FCN) No. 729) for Europe and the United States. Tritan has passed the U.S. Food and Drug Administration FDA certification (Food Contact Notification (FCN) No.729) and is the designated material for baby products in Europe and America.
4. PPSU material
PPSU (polyphenylsulfone) material is an amorphous thermoplastic, high temperature resistance 0 ℃ ~ 180 ℃, can be filled with hot water, high permeability, high hydrolysis stability, is able to withstand steam sterilization of children's bottles material, does not contain carcinogenic chemicals bisphenol A. Author: TestcooInspect https://www.bilibili.com/read/ cv18243140/ Source: bilibili
ITEM | UNIT | SZ—1300A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 35 | 40 | 45 |
SCREW LID RATIO | L/D | 24 | 21 | 18.7 |
THEORETICAL SHOT VOLUME | CM3 | 173 | 226 | 286 |
SHOT WEIGHT(PS) | g | 158 | 206 | 260 |
INJECTION PRESSURE | Mpa | 235 | 180 | 142 |
THEORETICAL INJECTION RATE(PS) | g/s | 110 | 143 | 181 |
PLASTICISING CAPACITY | g/s | 13.8 | 19.7 | 27.1 |
SCREW TORQUE | N.m | 740 | ||
MAX.SCREW ROTATE SPEED | r/min | 250 | ||
INJECTION STROKE | mm | 180 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1300 | ||
MAX.OPENING STROKE | mm | 400 | ||
SPACE BETWEEN TIE BARS | mm | 420×420 | ||
MOULD HEIGHT | mm | 160-440 | ||
MAX.DAYLIGHT | mm | 840 | ||
EJECTOR FORCE | KN | 31.4 | ||
EJECTOR STROKE | mm | 100 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 13 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 9.2 | ||
HEATING ZONE | 4 | |||
SIZE | m | 4.7×1.25×1.85 | ||
NET WEIGHT | t | 4.3 | ||
OIL TANK CAPACITY | L | 360 | ||
INTERNATIONAL DESIGNATION | 1300—410 | |||
Our Campany
ZHANG JIA GANG SHEN ZHOU MACHINERY CO.,LTD.located in Zhangjiagang City-new Port City of China, We are close to the port city and have great convenience on transportation.
We are an entity factory with a whole line of injection molding machines. We gather many years of rich experience to make “SZ” series automatic computer Injection Molding Machine and its
equipment. Its excellent quality, stable performance, attractive price-performance meet the client's demands and profits.
We are a manufacture of injection molding machine .Our machines are sold to more than 20 provinces of China and exported to 50 countries of Europe, USA. Latin and South America.
Middle East. Southeast Asia, Russia, Middle Asia. Africa. And all of our clients give high reputations for our machines and services.
We are the member of Germany TUV (IS09001:2000) registered and Italy CE certified (IG 0407). Our company is accredited for meeting
international standards in management responsibility, quality control, design control, process control, customer
service and other key criteria. And supply continuous satisfaction for our valuable customers at home and abroad.
Adhering to our long-established corporate spirit of 'Everything for Customers”, we will do our best to offer customers the best
quality products and service at the competitive prices, to meet the variable challenges and keep advantage.
SHEN ZHOU a reliable partner in Plastic Injection Processing.
1. PC material
PC itself is not toxic, but PC (polycarbonate) material is not resistant to high temperatures, if heat or in an acidic or alkaline environment, it is easy to release the toxic substance bisphenol A. Some studies have shown that bisphenol A can lead to endocrine disruption, cancer, metabolic disorders resulting in obesity, premature maturation of children and other possible and bisphenol A-related, many countries, such as Canada early on prohibited the addition of bisphenol A to the food packaging, and China has banned the import and sale of baby bottles made of PC in 2011. Many countries, such as Canada, banned the addition of BPA to food packaging at an early stage, and China banned the import and sale of baby bottles made of PC in 2011.
If you are buying a cup made of PC, please buy it from a regular channel to ensure that it is manufactured in compliance with the law.
2. PP material
PP polypropylene, colorless, odorless, non-toxic, semi-transparent, does not contain bisphenol A, flammable, melting point of 165 ℃, in 155 ℃ or so will be softened, the use of temperature range of -30 ~ 140 ℃. PP tableware cups are also the only microwaveable plastic material.
3. tritan
tritan is also a chemical polyester, which solves the disadvantages of many plastics, including toughness, impact strength, hydrolytic stability, chemical resistance, high transparency, and there is no PC in the bisphenol A. tritan has passed the U.S. Food and Drug Administration FDA certification (Food Contact Notification (FCN) No. 729) for Europe and the United States. Tritan has passed the U.S. Food and Drug Administration FDA certification (Food Contact Notification (FCN) No.729) and is the designated material for baby products in Europe and America.
4. PPSU material
PPSU (polyphenylsulfone) material is an amorphous thermoplastic, high temperature resistance 0 ℃ ~ 180 ℃, can be filled with hot water, high permeability, high hydrolysis stability, is able to withstand steam sterilization of children's bottles material, does not contain carcinogenic chemicals bisphenol A. Author: TestcooInspect https://www.bilibili.com/read/ cv18243140/ Source: bilibili
ITEM | UNIT | SZ—1300A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 35 | 40 | 45 |
SCREW LID RATIO | L/D | 24 | 21 | 18.7 |
THEORETICAL SHOT VOLUME | CM3 | 173 | 226 | 286 |
SHOT WEIGHT(PS) | g | 158 | 206 | 260 |
INJECTION PRESSURE | Mpa | 235 | 180 | 142 |
THEORETICAL INJECTION RATE(PS) | g/s | 110 | 143 | 181 |
PLASTICISING CAPACITY | g/s | 13.8 | 19.7 | 27.1 |
SCREW TORQUE | N.m | 740 | ||
MAX.SCREW ROTATE SPEED | r/min | 250 | ||
INJECTION STROKE | mm | 180 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1300 | ||
MAX.OPENING STROKE | mm | 400 | ||
SPACE BETWEEN TIE BARS | mm | 420×420 | ||
MOULD HEIGHT | mm | 160-440 | ||
MAX.DAYLIGHT | mm | 840 | ||
EJECTOR FORCE | KN | 31.4 | ||
EJECTOR STROKE | mm | 100 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 13 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 9.2 | ||
HEATING ZONE | 4 | |||
SIZE | m | 4.7×1.25×1.85 | ||
NET WEIGHT | t | 4.3 | ||
OIL TANK CAPACITY | L | 360 | ||
INTERNATIONAL DESIGNATION | 1300—410 | |||
Our Campany
ZHANG JIA GANG SHEN ZHOU MACHINERY CO.,LTD.located in Zhangjiagang City-new Port City of China, We are close to the port city and have great convenience on transportation.
We are an entity factory with a whole line of injection molding machines. We gather many years of rich experience to make “SZ” series automatic computer Injection Molding Machine and its
equipment. Its excellent quality, stable performance, attractive price-performance meet the client's demands and profits.
We are a manufacture of injection molding machine .Our machines are sold to more than 20 provinces of China and exported to 50 countries of Europe, USA. Latin and South America.
Middle East. Southeast Asia, Russia, Middle Asia. Africa. And all of our clients give high reputations for our machines and services.
We are the member of Germany TUV (IS09001:2000) registered and Italy CE certified (IG 0407). Our company is accredited for meeting
international standards in management responsibility, quality control, design control, process control, customer
service and other key criteria. And supply continuous satisfaction for our valuable customers at home and abroad.
Adhering to our long-established corporate spirit of 'Everything for Customers”, we will do our best to offer customers the best
quality products and service at the competitive prices, to meet the variable challenges and keep advantage.
SHEN ZHOU a reliable partner in Plastic Injection Processing.
