English  |
| Quantity: | |
|---|---|
SZ
CE Certificate
ITEM | UNIT | SZ—1700A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 45 | 50 | 55 |
SCREW LID RATIO | L/D | 23.3 | 21 | 19.1 |
THEORETICAL SHOT VOLUME | CM3 | 358 | 442 | 534 |
SHOT WEIGHT(PS) | g | 326 | 402 | 486 |
INJECTION PRESSURE | Mpa | 219 | 178 | 147 |
THEORETICAL INJECTION RATE(PS) | g/s | 142 | 175 | 212 |
PLASTICISING CAPACITY | g/s | 20.1 | 26.5 | 34.2 |
SCREW TORQUE | N.m | 1250 | ||
MAX.SCREW ROTATE SPEED | r/min | 200 | ||
INJECTION STROKE | mm | 225 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1700 | ||
MAX.OPENING STROKE | mm | 460 | ||
SPACE BETWEEN TIE BARS | mm | 480×480 | ||
MOULD HEIGHT | mm | 180-500 | ||
MAX.DAYLIGHT | mm | 960 | ||
EJECTOR FORCE | KN | 45.2 | ||
EJECTOR STROKE | mm | 115 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 15 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 13.6 | ||
HEATING ZONE | 4 | |||
SIZE | m | 5.3×1.35×1.9 | ||
NET WEIGHT | t | 5.6 | ||
OIL TANK CAPACITY | L | 420 | ||
INTERNATIONAL DESIGNATION | 1700—785 | |||
Five elements of injection molding process parameters
1.Injection Pressure
2.Injection time
3.Molding Temperature
4.Holding Pressure Pressure and time
5.Back Back Pressure
CE Certificate
ITEM | UNIT | SZ—1700A | ||
INJECTION UNIT | ||||
SCREW DIAMETER | mm | 45 | 50 | 55 |
SCREW LID RATIO | L/D | 23.3 | 21 | 19.1 |
THEORETICAL SHOT VOLUME | CM3 | 358 | 442 | 534 |
SHOT WEIGHT(PS) | g | 326 | 402 | 486 |
INJECTION PRESSURE | Mpa | 219 | 178 | 147 |
THEORETICAL INJECTION RATE(PS) | g/s | 142 | 175 | 212 |
PLASTICISING CAPACITY | g/s | 20.1 | 26.5 | 34.2 |
SCREW TORQUE | N.m | 1250 | ||
MAX.SCREW ROTATE SPEED | r/min | 200 | ||
INJECTION STROKE | mm | 225 | ||
CLAMPING UNIT | ||||
MAX.CLAMPING FORCE K | KN | 1700 | ||
MAX.OPENING STROKE | mm | 460 | ||
SPACE BETWEEN TIE BARS | mm | 480×480 | ||
MOULD HEIGHT | mm | 180-500 | ||
MAX.DAYLIGHT | mm | 960 | ||
EJECTOR FORCE | KN | 45.2 | ||
EJECTOR STROKE | mm | 115 | ||
EJECTOR QUANTITY | 5 | |||
OTHER | ||||
PUMP MOTOR POWER | KW | 15 | ||
PUMP PRESSURE | Mpa | 16 | ||
HEATING POWER | KW | 13.6 | ||
HEATING ZONE | 4 | |||
SIZE | m | 5.3×1.35×1.9 | ||
NET WEIGHT | t | 5.6 | ||
OIL TANK CAPACITY | L | 420 | ||
INTERNATIONAL DESIGNATION | 1700—785 | |||
Five elements of injection molding process parameters
1.Injection Pressure
2.Injection time
3.Molding Temperature
4.Holding Pressure Pressure and time
5.Back Back Pressure
