English  |
| Quantity: | |
|---|---|
Mobilize the machine
Technical Parameter
项目 ITEM | 单位UNIT | SZ—2400A | |||
注射装置 INJECTION UNIT | |||||
螺杆直径 | SCREW DIAMETER | mm | 55 | 60 | 65 |
螺杆长径比 | SCREW LID RATIO | L/D | 22.9 | 21 | 19.4 |
理论注射容积 | THEORETICAL SHOT VOLUME | CM3 | 665 | 791 | 929 |
注射质量(PS料) | SHOT WEIGHT(PS) | g | 605 | 720 | 845 |
注射压力 | INJECTION PRESSURE | Mpa | 210 | 176 | 150 |
理论注射速率(PS料) | THEORETICAL INJECTION RATE(PS) | g/s | 176.5 | 210 | 245 |
塑化能力(PS料) | PLASTICISING CAPACITY | g/s | 26.4 | 32.5 | 40 |
螺杆驱动扭矩 | SCREW TORQUE | N.m | 2000 | ||
螺杆转速 | MAX.SCREW ROTATE SPEED | r/min | 150 | ||
洼射行程 | INJECTION STROKE | mm | 280 | ||
合模装置 CLAMPING UNIT | |||||
合模力 | MAX.CLAMPING FORCE K | KN | 2400 | ||
移模行程 | MAX.OPENING STROKE | mm | 530 | ||
拉杆有效间距(VxH) | SPACE BETWEEN TIE BARS | mm | 555×555 | ||
允许模厚(MIN-MAX) | MOULD HEIGHT | mm | 200-570 | ||
模板开距 | MAX.DAYLIGHT | mm | 1100 | ||
液压顶出力 | EJECTOR FORCE | KN | 61.5 | ||
液压顶出行程 | EJECTOR STROKE | mm | 135 | ||
液压顶出杆总数 | EJECTOR QUANTITY | 9 | |||
其它 OTHER | |||||
油泵电动机功率 | PUMP MOTOR POWER | KW | 22 | ||
油泵压力 | PUMP PRESSURE | Mpa | 16 | ||
料简加热功率 | HEATING POWER | KW | 18.5 | ||
加热区段 | HEATING ZONE | 5 | |||
机器外形(LxWxH) | SIZE | m | 6.2×1.6×2.1 | ||
机器净重 | NET WEIGHT | t | 8.0 | ||
油箱容积 | OIL TANK CAPACITY | L | 440 | ||
国际公认型号 | INTERNATIONAL DESIGNATION | 2400—1390 | |||
SZ series Injection Molding Machine will offer you the best performance, safety and reliability. This machine applies 5-point double toggle links clamping system featured reliable, energy-saving, high-speed, stable, long closing stroke and big clamping force. Hydraulic motor drives the mould adjustment device with the advantage of rapid and light. This machine is equipped with one line type screw. The hydraulic motor with low speed and big torque can directly drive plasticizing, double cylinder type injection system, with the feature of processing many kinds of material, strong plasticizing ability and fine injection effect. Three optional screws are supplied for every model to meet the various requirements of customers. The barrel is heated by resistance heating rings. The temperatures are controlled by automatic Temperature Controller or the PAD system in computer with the feature of quick, stable and even. This machine offers electrical and mechanical safety interlock at least. And the bigger or superior machine also provide hydraulic safety interlock to assure safe and reliable.
Mobilize the machine
Technical Parameter
项目 ITEM | 单位UNIT | SZ—2400A | |||
注射装置 INJECTION UNIT | |||||
螺杆直径 | SCREW DIAMETER | mm | 55 | 60 | 65 |
螺杆长径比 | SCREW LID RATIO | L/D | 22.9 | 21 | 19.4 |
理论注射容积 | THEORETICAL SHOT VOLUME | CM3 | 665 | 791 | 929 |
注射质量(PS料) | SHOT WEIGHT(PS) | g | 605 | 720 | 845 |
注射压力 | INJECTION PRESSURE | Mpa | 210 | 176 | 150 |
理论注射速率(PS料) | THEORETICAL INJECTION RATE(PS) | g/s | 176.5 | 210 | 245 |
塑化能力(PS料) | PLASTICISING CAPACITY | g/s | 26.4 | 32.5 | 40 |
螺杆驱动扭矩 | SCREW TORQUE | N.m | 2000 | ||
螺杆转速 | MAX.SCREW ROTATE SPEED | r/min | 150 | ||
洼射行程 | INJECTION STROKE | mm | 280 | ||
合模装置 CLAMPING UNIT | |||||
合模力 | MAX.CLAMPING FORCE K | KN | 2400 | ||
移模行程 | MAX.OPENING STROKE | mm | 530 | ||
拉杆有效间距(VxH) | SPACE BETWEEN TIE BARS | mm | 555×555 | ||
允许模厚(MIN-MAX) | MOULD HEIGHT | mm | 200-570 | ||
模板开距 | MAX.DAYLIGHT | mm | 1100 | ||
液压顶出力 | EJECTOR FORCE | KN | 61.5 | ||
液压顶出行程 | EJECTOR STROKE | mm | 135 | ||
液压顶出杆总数 | EJECTOR QUANTITY | 9 | |||
其它 OTHER | |||||
油泵电动机功率 | PUMP MOTOR POWER | KW | 22 | ||
油泵压力 | PUMP PRESSURE | Mpa | 16 | ||
料简加热功率 | HEATING POWER | KW | 18.5 | ||
加热区段 | HEATING ZONE | 5 | |||
机器外形(LxWxH) | SIZE | m | 6.2×1.6×2.1 | ||
机器净重 | NET WEIGHT | t | 8.0 | ||
油箱容积 | OIL TANK CAPACITY | L | 440 | ||
国际公认型号 | INTERNATIONAL DESIGNATION | 2400—1390 | |||
SZ series Injection Molding Machine will offer you the best performance, safety and reliability. This machine applies 5-point double toggle links clamping system featured reliable, energy-saving, high-speed, stable, long closing stroke and big clamping force. Hydraulic motor drives the mould adjustment device with the advantage of rapid and light. This machine is equipped with one line type screw. The hydraulic motor with low speed and big torque can directly drive plasticizing, double cylinder type injection system, with the feature of processing many kinds of material, strong plasticizing ability and fine injection effect. Three optional screws are supplied for every model to meet the various requirements of customers. The barrel is heated by resistance heating rings. The temperatures are controlled by automatic Temperature Controller or the PAD system in computer with the feature of quick, stable and even. This machine offers electrical and mechanical safety interlock at least. And the bigger or superior machine also provide hydraulic safety interlock to assure safe and reliable.
