Availability: | |
---|---|
Quantity: | |
"What's so great about all-electric injection molding machines?
The reason why the all-electric injection molding machine is welcomed by the market is that it has the performance that the all-hydraulic injection molding machine can't reach, which is mainly manifested in:
"Energy saving" energy saving is the biggest advantage of electric injection molding machine, due to the servo motor according to the requirements of the force required by the actuator to drive directly, not only to improve the efficiency, but also improve the energy utilization rate, its energy utilization rate can reach more than 95%, so it can be compared with the fully hydraulic injection molding machine energy saving 25% -60%.
Stable injection performance, the dynamic technical parameters of the hydraulic injection molding machine are affected by the change of hydraulic oil temperature, easy to fluctuate, compared with the dynamic technical parameters of the electric injection molding machine basically without the interference of external factors, the computer storage of the mold molding parameters are always in line with the actual molding conditions, so the injection performance is stable, the accurate injection molding parameters of the rapid response, only in the servomotor system So the injection performance is stable and the fast response of precise injection molding parameters can only be truly reflected in the servo motor system.
High Quality Hydraulic Plastic Chair Making Jumbo Injection Molding Machine
ITEM | UNIT | SZ—10000A | |||
INJECTION UNIT | |||||
SCREW DIAMETER | mm | 100 | 110 | 120 | 130 |
SCREW LID RATIO | L/D | 24.2 | 22 | 20.2 | 18.6 |
THEORETICAL SHOT VOLUME | CM3 | 4083 | 4941 | 5880 | 6901 |
SHOT WEIGHT(PS) | g | 3715 | 4496 | 5350 | 6280 |
INJECTION PRESSURE | Mpa | 206 | 171 | 143 | 122 |
THEORETICAL INJECTION RATE(PS) | g/s | 695 | 841 | 1001 | 1175 |
PLASTICISING CAPACITY | g/s | 96 | 116 | 130 | 148 |
SCREW TORQUE | N.m | 8690 | |||
MAX.SCREW ROTATE SPEED | r/min | 110 | |||
INJECTION STROKE | mm | 520 | |||
CLAMPING UNIT | |||||
MAX.CLAMPING FORCE K | KN | 10000 | |||
MAX.OPENING STROKE | mm | 1160 | |||
SPACE BETWEEN TIE BARS | mm | 1110×1110 | |||
MOULD HEIGHT | mm | 450-1200 | |||
MAX.DAYLIGHT | mm | 2360 | |||
EJECTOR FORCE | KN | 245 | |||
EJECTOR STROKE | mm | 350 | |||
EJECTOR QUANTITY | 21 | ||||
OTHER | |||||
PUMP MOTOR POWER | KW | 90 | |||
PUMP PRESSURE | Mpa | 16 | |||
HEATING POWER | KW | 68.45 | |||
HEATING ZONE | 6 | ||||
SIZE | m | 12.38×2.8×3.5 | |||
NET WEIGHT | t | 60 | |||
OIL TANK CAPACITY | L | 1700 | |||
INTERNATIONAL DESIGNATION | 10000—8410 |
"What's so great about all-electric injection molding machines?
The reason why the all-electric injection molding machine is welcomed by the market is that it has the performance that the all-hydraulic injection molding machine can't reach, which is mainly manifested in:
"Energy saving" energy saving is the biggest advantage of electric injection molding machine, due to the servo motor according to the requirements of the force required by the actuator to drive directly, not only to improve the efficiency, but also improve the energy utilization rate, its energy utilization rate can reach more than 95%, so it can be compared with the fully hydraulic injection molding machine energy saving 25% -60%.
Stable injection performance, the dynamic technical parameters of the hydraulic injection molding machine are affected by the change of hydraulic oil temperature, easy to fluctuate, compared with the dynamic technical parameters of the electric injection molding machine basically without the interference of external factors, the computer storage of the mold molding parameters are always in line with the actual molding conditions, so the injection performance is stable, the accurate injection molding parameters of the rapid response, only in the servomotor system So the injection performance is stable and the fast response of precise injection molding parameters can only be truly reflected in the servo motor system.
High Quality Hydraulic Plastic Chair Making Jumbo Injection Molding Machine
ITEM | UNIT | SZ—10000A | |||
INJECTION UNIT | |||||
SCREW DIAMETER | mm | 100 | 110 | 120 | 130 |
SCREW LID RATIO | L/D | 24.2 | 22 | 20.2 | 18.6 |
THEORETICAL SHOT VOLUME | CM3 | 4083 | 4941 | 5880 | 6901 |
SHOT WEIGHT(PS) | g | 3715 | 4496 | 5350 | 6280 |
INJECTION PRESSURE | Mpa | 206 | 171 | 143 | 122 |
THEORETICAL INJECTION RATE(PS) | g/s | 695 | 841 | 1001 | 1175 |
PLASTICISING CAPACITY | g/s | 96 | 116 | 130 | 148 |
SCREW TORQUE | N.m | 8690 | |||
MAX.SCREW ROTATE SPEED | r/min | 110 | |||
INJECTION STROKE | mm | 520 | |||
CLAMPING UNIT | |||||
MAX.CLAMPING FORCE K | KN | 10000 | |||
MAX.OPENING STROKE | mm | 1160 | |||
SPACE BETWEEN TIE BARS | mm | 1110×1110 | |||
MOULD HEIGHT | mm | 450-1200 | |||
MAX.DAYLIGHT | mm | 2360 | |||
EJECTOR FORCE | KN | 245 | |||
EJECTOR STROKE | mm | 350 | |||
EJECTOR QUANTITY | 21 | ||||
OTHER | |||||
PUMP MOTOR POWER | KW | 90 | |||
PUMP PRESSURE | Mpa | 16 | |||
HEATING POWER | KW | 68.45 | |||
HEATING ZONE | 6 | ||||
SIZE | m | 12.38×2.8×3.5 | |||
NET WEIGHT | t | 60 | |||
OIL TANK CAPACITY | L | 1700 | |||
INTERNATIONAL DESIGNATION | 10000—8410 |